View Issue Details

IDProjectCategoryView StatusLast Update
0002503MMW v4Synchronizationpublic2006-05-30 15:05
Reporterrusty Assigned To 
PriorityimmediateSeveritycrashReproducibilityalways
Status closedResolutionfixed 
Fixed in Version2.5.3 
Summary0002503: Can't close MM if user doesn't disconnect ifp-880 MTP device
DescriptionIf the user follows the sequence of actions described below, then MM does not close properly and subsequent attempts to run it fail.
1) Open MM
2) Plug in iRiver IFP-880 device
3) Close MM
--> MM appears to close, but the process continues to run (as evidenced in the task manager.
4) Try to run MM
--> GUI appears partially and is frozen

The only way to get out of this state is by ending the process via the task manager.

A log is posted to the ftp server.

Note: The device in question is using the wmdm driver. I also tried this with the Creative Vision and the problem did not occur.
TagsNo tags attached.
Fixed in build1000

Activities

jiri

2006-05-26 07:22

administrator   ~0007283

Fixed in build 1000.
 - It's rather a bug in iFP-880, but I made some workarounds so that MM is even more friendly to WMDM devices.

rusty

2006-05-28 05:00

administrator   ~0007294

I tested it, but it still seems to not close. More specifically:

-Open MM
-Connect IFP-880
-Close MM
-->MM closes properly

BUT
-Open MM
-Connect IFP-880
-Synch songs to the device
-Close MM
-->MM DOESN'T close

jiri

2006-05-29 12:46

administrator   ~0007301

Now it should be fully fixed (note though, that iFP-880 driver is buggy and causes problems. They aren't apparent in WMP, mainly because WMDM isn't used in a multithreaded way there)

rusty

2006-05-30 03:46

administrator   ~0007305

Tested 965--MM still can't close :(

jiri

2006-05-30 14:53

administrator   ~0007309

As discussed over IM, it seems we can't do anything more due to problems with iFP drivers.

rusty

2006-05-30 15:05

administrator   ~0007311

Verified 2.5.3.965. Will add faq entry.