0013586: RIP: Ripping Dialog do not check if Destination drive letter is accessible

ID	Project	Category	View Status	Date Submitted	Last Update

0013586	MMW v4	Burning / Disc Handling	public	2016-10-10 17:29	2017-05-04 23:59

Reporter	peke	Assigned To
Priority	urgent	Severity	major	Reproducibility	always
Status	closed	Resolution	fixed
Target Version	4.1.16	Fixed in Version	4.1.16

Summary	0013586: RIP: Ripping Dialog do not check if Destination drive letter is accessible
Description	Ripping Dialog do not check if Destination drive letter is accessible but rather report error on each track it fails to RIP. It should either Show RED text warning and mark tracks as RED or simply report on the end. Main Problem is that when only Volume leveling is enabled it firstly rips tracks to Temp and then on Conversion copy to destination reports error which confuses user that all is OK and the problem is in MMW not in his destination path.
Steps To Reproduce	Steps to Reproduce: 1. Start Standard RIP and disable all except Volume Leveling 2. RIP One CD/TRACK so that MMW remember settings 3. Use drive manager (Windows explorer -> Right click -> Manage -> Disk Manager -> Right click on drive -> Change Drive letter and change it to different one) 5. Start RIP Again 6. MMW will throw errors on RIP END when leveling tracks MMW should not start to rip before it checks if destination path/drive exist and save user time to wait till all tracks are ripped.
Additional Information	UPO-682-68163 VVQ-725-61020
Tags	No tags attached.
Attached Files	rip.jpg (28,575 bytes) rip.jpg (28,575 bytes)

Fixed in build	1834

Ludek 2016-10-10 18:31 developer ~0045885	Peke, this sounds like duplicate of 0013170 that we have never been able to reproduce?

peke 2016-10-10 21:08 developer ~0045888	Updated steps to reproduce.

Ludek 2016-10-14 09:05 developer ~0045932	Peke, I tried exactly your steps with only '[x] Level Track Volume' enabled and same as 0013170 I still cannot replicate. See the attached screenshot, the error appears as expected as it was drive I: that was unplugged as rip destination. If you still can replicate then please attach debug log.

peke 2017-01-23 22:21 developer ~0047051	Very tricky to replicate and needs exact timing when you pull out external HDD 1 out of 10, pushing to 4.1.16.

peke 2017-05-03 09:58 developer ~0047893	I updated steps based on user complain in VVQ-725-61020

Ludek 2017-05-03 11:56 developer ~0047896 Last edited: 2017-05-03 11:57	Fixed in 1834. Once e.g. mask is "L:\<artist><album>" and L:\ is inaccessible then this message appears after clicking [OK] "L:\ is not accessible" [OK] and user can change the path settings on the rip dialog (as the dialog isn't closed and rip doesn't actually start) like in case of a missing codec.

peke 2017-05-04 23:59 developer ~0047919	Verified 1834

duplicate of	0013170	closed	peke	When Destination Drive letter is not Available it is reported like no disk access
has duplicate	0013072	closed	peke	CD RIP: MMW incorrectly Show error dialogs